Skip to main content

First-Time Setup Guide

This article walks you through assembling, adjusting, and activating your scooter for the first ride.

Written by Jeremy Augment
Updated over 3 months ago

Step 1 — Unbox Carefully

Open the box from the top and remove protective foam. Do not use sharp tools near cables or the deck.


Step 2 — Secure the Handlebar Stem

  1. Lift the stem upright

  2. Lock the folding mechanism

  3. Tighten the screws using the included hex keys

  4. Shake lightly to confirm stability


Step 3 — Install the Handlebar (Agaru Serie)

  • Insert the handlebar into the stem

  • Connect the wires

  • Tighten screws

  • Align the brake lever and throttle evenly


Step 4 — Check Tires & Brakes

  • Inflate tires to recommended PSI (listed on the sidewall)

  • Squeeze the brake lever to ensure resistance

  • Test rolling resistance manually


Step 5 — Charge the Scooter Fully

Before the first ride:

  • Plug the charger into the wall

  • Then connect to scooter (important order)

  • Wait for the green light

    A full charge calibrates the battery.


Step 6 — Connect to the App

Follow the App & Connectivity article:

  • Enable Bluetooth

  • Add your scooter

  • Complete pairing

  • Unlock your scooter digitally


Step 7 — Take Your First Ride

Find a safe, flat area:

✔ Start slow

✔ Test acceleration

✔ Practice braking

✔ Learn turning radius

You’re ready to ride!

Did this answer your question?