What’s in the Box
ES One 10 electric scooter
Charger and power cable
Handlebar grips
Hex key
User manual
First-Time Setup
Open the folding mechanism and raise the stem upright
Lock the folding lever and secure it with the safety ring
Install the brake lever and handlebar grips
(note: grips use reverse threads)
Fully charge the battery before first use
Check tire pressure (recommended 2.0–2.5 bar)
Controls & Operation
Power on using the button on the throttle
Change speed mode using the upper button
Turn lights on/off with a double press
Start riding by pushing off with your foot while holding the throttle
Braking:
Light brake → front eABS
Stronger brake → rear disc brake
Foot brake via rear fender
Safe Use Guidelines
Helmet use is strongly recommended
Do not carry passengers
No jumping or stunt riding
Avoid heavy rain and deep water
Not suitable for off-road or trail riding
The scooter is not a toy
Maintenance & Storage
Clean with a soft cloth only
Do not use pressure washers
If unused, charge the battery at least once every 3 months
Store indoors in a dry, frost-free place
Maintenance Service (Augment)
Contact customer support in case of issues
Provide the scooter’s serial number and a clear description of the problem
A replacement scooter may be shipped if needed
Spare parts can also be provided for self-repair if preferred
Theft & Insurance
Theft is not covered by the maintenance service
Always lock the scooter when parked in public
Home insurance is recommended to cover theft cases