Assembly (First Use)
How to Ride the Agaru Scooter
Wear protective gear
Turn on the scooter
Push forward with one foot to start moving
Press the throttle once the scooter is rolling
Place both feet on the deck (strong foot at the back)
Turning
Pull the handlebar slightly toward the direction you want to turn
Lean your body gently to maintain balance
Slowing Down and Stopping
Release the throttle to slow down
Use the brake lever to stop
Put one foot on the ground when stopping completely
Battery Safety
Always:
Use only the original Augment charger
Keep the battery away from children and pets
Charge the battery at least once a month
Never:
Open or modify the battery
Use a damaged, leaking, or overheating battery
Charge the battery in freezing temperatures
Charging Instructions
Turn off the scooter
Open the rubber charging port cover
Make sure the port is clean and dry
Plug the charger into the wall
Connect the charger to the battery
Red light = charging
Green light = fully charged
Unplug and close the charging port
You can charge the battery while attached or removed.
Maintenance Tips
To keep your scooter in good condition:
Check tire pressure regularly
Clean only with a soft or microfiber cloth
Never use a pressure washer
Store the scooter and battery in a dry place
Charge the battery at least once every 1–3 months
Do not disassemble the scooter yourself.
Package Contents
Your package includes:
Agaru e-scooter
Charger
User manual
Tool kit
If anything is missing or damaged, contact Augment support immediately.