LED Display Information
The display shows:
Current speed
Battery level
Ride mode
Error messages
Temperature warnings
Assembly Instructions
Release the folded head tube
Tighten the brake lever using an M5 hex key
Attach left and right handlebars and tighten firmly
Folding and Unfolding the Scooter
To Fold:
Pull down the folding lever
Fold the head tube
Hook it to the rear fender
To Unfold:
Unhook the head tube
Pull it fully upright
Lock the folding lever in place
How to Ride Alturo
Wear protective gear
Turn on the scooter
Push forward with one foot to start moving
Press the throttle — the motor activates once moving
Place both feet on the deck
Lean forward to accelerate, lean back to slow down
To turn:
Pull the handlebar slightly toward the direction you want to turn
Counter-balance with your body
To stop:
Release the throttle
Use the brake lever
Put one foot on the ground when stopping fully
Battery Safety and Handling
Use only the original Augment charger
Never open or modify the battery
Keep away from children and pets
Charging temperature: 0–40°C
Maximum operating temperature: 45°C
Charge at least once per month
Do not use the battery if it is damaged, leaking, overheating, or smells unusual.
Charging Instructions
Turn off the scooter
Open the charging port cover
Plug the charger into the wall
Connect the charger to the battery
Red light = charging
Green light = fully charged
Unplug and close the charging port
You can charge the battery while attached or removed.
Maintenance Tips
Check tire pressure regularly
Clean with a soft cloth only
Do not use water or pressure washers
Store in a dry place
Charge the battery monthly
Do not disassemble the scooter.
Package Contents
Electric scooter
Charger
User manual
Tool kit
If anything is missing or damaged, contact us immediately.
Your subscription includes Total Care, so contact support if anything breaks.